Getting started · Lesson 3
Read tab and chord diagrams
Understand the two kinds of notation used in every lesson, so you can read any exercise at a glance.
By the end you can
- Read a chord diagram and place your fingers from it
- Read a line of tab and play the notes in order
Guitarists rarely need standard sheet music. Two simple pictures cover almost everything: chord diagrams for shapes you hold, and tab for notes you play one after another.
Chord diagrams
A chord diagram is a picture of the fretboard standing upright, as if the guitar were hanging on a wall facing you.
- The six vertical lines are the strings. The 6th (thickest) string is on the left.
- The horizontal lines are frets. The thick line at the top is the nut.
- A dot shows where to press. The number inside is the finger to use.
- o above a string means play it open. x means do not play it.
Read this one from left to right: 6th string open, 5th string fret 2 with finger 2, 4th string fret 2 with finger 3, and the three thinnest strings open.
Tab
Tab (short for tablature) has six horizontal lines, one per string. This time the
thinnest string is the top line, labelled e, and the thickest is the bottom line,
labelled E.
A number on a line tells you which fret to play on that string. 0 means open. Read from
left to right, like text. Numbers stacked in the same column are played together.
This line says: 5th string fret 2, then 4th string fret 2, then the 3rd, 2nd and 1st strings open, one note at a time. Tab does not show rhythm precisely, so each exercise tells you how to count it.
Practice
Play the tab
Play the five notes from the tab above, one note per click, then rest for three clicks and repeat.